Yuneec Radio Controls

Yuneec ST24

The ST24 receiver (use the right-hand port when looking at the connectors from their front) can be connected to the “SPKT/DSM” port of Pixhawk. The pinout is:

  • Pixhawk DSM pin 1 - ST24 RX pin 2
  • Pixhawk DSM pin 2 - ST24 RX pin 1
  • Pixhawk DSM pin 3 - ST24 RX pin 4

A photo of the cable is provided below for reference (you can use a FrSky D4R-II telemetry cable and a Spektrum satellite cable by lifting the locking tabs and pulling the pins to create this cable).

Translations of this page:


Quick Links

QR Code: URL of current page